laminated structure
英 [ˈlæmɪneɪtɪd ˈstrʌktʃə(r)]
美 [ˈlæmɪneɪtɪd ˈstrʌktʃər]
层压（层状，胶合板）结构
双语例句
- On the organic field-effect transistors with laminated structure prepared by vacuum coating
采用真空镀膜制备的叠层结构有机场效应晶体管的研究 - Prepared and Research of Organic Field-effect Transistors with Laminated Structure
叠层结构有机场效应晶体管的制备与研究 - Analytical Solution of Temperature Field of Solid Rocket Motor Laminated Structure with High-Temperature Thermal Shock
高温热冲击下固体火箭发动机层合结构温度场解析解 - The laminated structure of near wake is verified by analyzing the correlation dimension, the Renyi entropy and the largest Lyapunov exponent.
通过对相关维、Renyi熵和最大Lyapunov指数的分析，得到了近尾流场的分层结构。 - MnO 2 with fine laminated structure was prepared by oxidizing Mn ( II) with ammonium persulfate ( NH 4) S 2O 8 in excess quantity alkaline solution.
研究了在过量碱溶液条件下，用过二硫酸铵（NH4）2S2O8氧化Mn（II）的方法制备了具有良好层状结构的MnO2（δMnO2）材料。 - Experimental study on the effect of stacking sequence on the carrying capacity of the laminated structure
铺层顺序对复合材料层合结构承载的影响 - Study for shear-lag rule of composite laminated structure
复合材料层压结构载荷参与规律研究 - Ply ( lamina), laminate, structure are three different levels for composite laminated structure design, there for Engineering constants, Material allowables and Structured design allowables are involved in designing of composite laminated structure.
复合材料层合板结构设计中，涉及单层、层合板、层合结构三个层次的性能，相应有材料工程常数、材料性能许用值和结构设计许用值。 - The results show that the loss factor of a laminated structure is stepped up by using magnetostrictive material as the constrained layer.
对板、曲板等算例的计算结果表明，用磁致伸缩材料作约束层可使层合结构损失因子提高。 - A checking method of laminated structure based on the essential property data of the plates
基于层合板基本性能数据的复合材料层合结构的强度校核方法 - Under the condition that the reliability of the laminated structure of composite materials is satisfied, the paper took the smallest possible total thickness as the objective function and carried out the optimal design of the fibre directional angle and thickness of composite materials.
在满足层合结构系统可靠度的情况下，以总厚度最小为目标函数，对复合材料的纤维方向角和厚度进行优化设计。 - The design ideas of in-situ fibrous monolithic structure and laminated structure are proposed for further improving the fracture toughness of whisker-reinforced ceramic composites. Both of the composites with these special structures have very high toughness and fracture work.
为了进一步提高晶须增韧陶瓷基复合材料的断裂韧性，提出了纤维独石结构和层状结构的复合材料的设计思路，这两类特殊结构的复合材料都具有非常高的断裂韧性和断裂功。 - LDHs is a new type of nanoparticle, Its special chemical composition makes it absorb HC1, and its special laminated structure could be inserted in the organic anion to modify its interlamellar behaviour.
纳米水滑石（LDHs）是一种新型的纳米粒子，其特殊的化学组成决定了其对HCl具有吸收作用，而且其特殊的层状结构可以对其进行层间有机阴离子嵌入改性。 - Describes its laminated structure and manufacturing method. Calculations of its longitudinal compression and lateral shear spring rates are presented and the main factors of influence on its performance are discussed.
文中介绍了该弹性杆的层压型结构及其制造方法，分析了该杆的轴向压缩弹簧刚度和横向剪切弹簧刚度的计算方法，讨论了影响该杆性能的主要因素。 - Research on the Method of Stress Analysis around Cutout in Laminated Structure
复合材料叠层结构孔口附近应力分析方法研究 - Test results of this lot of material exhibited scattered corrosion fatigue data, mainly caused by laminated structure and nonhomogeneous microstructure, effected by composition segregation, as well as by the excessive amount of inclusions and their nonhomogeneous distribution.
结果表明：该批材料腐蚀疲劳数据散乱。其主要原因是材料存在由成分偏析引起的层状结构和组织结构不均匀，夹杂物超标和分布不均匀。 - Using boundary element-finite element coupling analysis method, an acoustic eigen-analysis problem of damaged composite laminated structure in heavy fluid is investigated. A finite element formula is established on basis of Mindlin laminated plate theory and the special selecting numerical integration scheme.
本文采用复合材料结构有限元和可压缩流体边界元耦合分析方法，研究了重流体介质（HeavyFluid）中含层间分层损伤复合材料层合板结构的声特征值问题。 - Based on the new first order thermal laminated theory which is proposed by the author, the thermal laminated theory and FEM equation for nonlinear heat transfer analysis of composite laminated structure are constructed, the composite material nonlinearity is taken into account.
基于一阶热层合理论，考虑材料非线性的影响，建立了复合材料层合结构非线性传热分析的热层合理论及其有限元方程。 - A BGA substrate has a laminated structure, and therefore water cannot penetrate the substrate first.
因BGA基板具有叠层结构，水分不能首先透过基板。应优化BGA封装系统的设计，使其不易产生爆米花裂纹。 - A new design and preparation method for silicon nitride ceramic composite with laminated structure were studied.
从结构设计的角度出发研究了层状复合Si3N4陶瓷材料。 - Non-Stationary Random Vibration Analysis of Composite Laminated Structure Attached with Frequency-Dependant Damping Layer
附面阻尼随频率变化的复合材料层合结构非平稳随机振动分析 - SH waves in laminated structure of functionally gradient piezoelectric material
功能梯度压电材料层状结构中的SH波 - Hamilton Canonical Equation Theory of Laminated Structure and Application in Vibration Analysis of Turbo Generator Stator Core
叠层板结构Hamilton正则方程理论及其在发电机铁芯振动分析中的应用 - With the effect of applied voltage, carbon fiber cement mortar laminated structure will heat better.
碳纤维水泥砂浆叠层结构在外加电压作用下，有较好的发热效果。 - This paper adopts flexible pipe as a laminated structure consisting of multiple anisotropic reinforced layers and multiple isotropic rubber layers, and based on 3D anisotropic elastic theory, derives analytic solutions for mechanical response of flexible pipe under internal pressure.
本文将软管作为由多层各向异性增强层和多层各向同性橡胶层组成的层合结构，基于三维各向异性弹性理论提出内压作用下软管力学响应的解析解答。 - This paper presents the experimental and analytical of the three point bending for the laminated structure, and gets the load-displacement curves of structures.
本文针对研制的叠层结构进行了三点弯曲实验研究，得到了位移-载荷曲线。 - One is that through the plus or minus of the longitudinal fibers to determined put forward by Bert in 1977, its object of study for the orthotropic materials, and used to study composite laminated structure.
一种是Bert于1977年提出的以纤维纵向应变的正负为准则的模型，其研究对象为正交各向异性材料，该模型用于研究复合材料叠层结构。 - On basis of that, a tri-band circularly polarized microstrip antenna with laminated structure and multi fed geometry has been developed, as well as a planar self-complementary Archimedean spiral antenna and its balun.
在此研究基础上分别设计了一款叠层多馈形式的三频段圆极化微带贴片天线及一款平面自互补结构阿基米德螺旋天线及其平衡馈电巴伦。 - Then, the composite laminated structure to optimize the design, by modifying the angle of two kinds of single-layer thickness and the laying of parameters, get the best damping properties of the base of the structure.
然后，对复合材料的层合结构进行优化设计，通过修改单层厚度和铺设角度两种参数，得到最佳减振性能的基座结构。 - By the above study proved: it is can effectively improve the sound insulation and noise reduction capability of the ball mill acoustical enclosure, which produced with aluminum foam laminated structure.
通过以上的研究，证明以泡沫铝层合结构制造钢球磨煤机隔声罩可有效地提高隔声罩的隔声降噪性能。